Wiper Delete Install Guide

Install time:
15 to 20 minutes

What do you need for assembly?
- The wiper delete + black kit and tie wraps (included in the kit!)
- A socket set + screwdriver

Mounting instructions
- Important: Foil of the wiper delete only remove after assembly!
- Dismounting the wiper arm
- Remove the interior lining
- Next you have the wiper motor visible.
- Loosen 3 nuts
- Disconnect the wiper motor plug
- If necessary, remove the hose from the wiper motor and tie/bolt it in.
- Then remove the rubber seal from the window
- Clean the windscreen and check if the wiper delete fits well. Always be extra careful with the window.
- Mount the wiper delete from the inside of the car using the kit provided. Text on the wiper delete comes on the inside. (Inside is written on it)
- Lightly twist the cap back and forth to get rid of any air bubbles.
- Then allow to dry and reassemble the trim.
- Drying time is about 6 hours, after 24 hours you can wash the car again.
- Finally, remove the protective film that is on the wiper delete.

If you encounter problems with the installation of our wiper delete kit, please contact us directly.

Still have questions? Cantact us:

Whatsapp: +31 63 31 07 406

Email: info@b2kwheels.nl